Safety Information - Teltonika RUT955 User Manual

RUT955 User's Manual

SAFETY INFORMATION

In this document you will be introduced on how to use a router safely. We suggest you to adhere to the following
recommendations in order to avoid personal injuries and or property damage.
You have to be familiar with the safety requirements before using the device!
To avoid burning and voltage caused traumas, of the personnel working with the device, please follow these safety
requirements.
The device is intended to draw power from a Limited Power Source (LPS) whose power
consumption should not exceed 15VA and the current rating of the overcurrent protective
device should not exceed 2A.
The highest transient overvoltage in the output (secondary circuit) of the used PSU shall not
exceed 36V peak.
The device can be used with a Personal Computer (first safety class) or a Notebook (second
safety class). Associated equipment: a power supply unit (PSU) (LPS) and a personal computer
(PC) that will comply with the requirements of standard EN 60950-1 amendment.
Do not mount or service the device during a thunderstorm.
To avoid mechanical damage to the device it is recommended to transport it packed in a
damage-proof pack.
Protection of the primary circuits of the associated PC and PSU (LPS) against short circuits and
earth faults of the associated PC will be provided as part of the building installation.
To avoid mechanical damage to the device it is recommended to transport it packed in a damage-proof pack. While
using the device it should be placed in such a manner so that its indicating LEDs would be visible as they inform in which
working mode the device is and if it has any working problems.
Protection against overcurrent, short circuiting and earth faults should be provided as a part of the building
installation.
Signal level of the device depends on the environment in which it is working in. In case the device starts working
insufficiently, please refer to qualified personnel in order to repair this product. We recommend forwarding it to a
repair center or the manufacturer. There are no exchangeable parts inside the device.
Teltonika Solutions
9