Modes Of Different Serial Types In Rs232 And Rs485 - Teltonika RUT955 User Manual

RUT955 User's Manual
9.6.3

Modes of different serial types in RS232 and RS485

9.6.3.1 Console
In this mode the serial interface set up as a Linux console of the device. It can be used for debugging purposes, to
get the status of the device or to control it.
9.6.3.2 Over IP
In the Over IP Serial type the router provides a connection to a TPC/IP network for the devices connected via serial
interfaces.
Mode: Server
Field name Possible values
1. Protocol TCP
2. Mode Server / Client / Bidirect
3. No leading zeros Checked / Unchecked
3. TCP port 0 - 65535
4. Timeout (s) Any integer number
Mode: Client
Field name Possible values
1. Server Address Hostname or IP address
2. TCP port 0 - 65535
3. Reconnect Any integer number
intervals (s)
Teltonika Solutions
Explanation
The protocol uses for data transmission
Server - wait for incoming connection
Client - initiate the connection
Bidirect – acts as a client by default, but at the same time waits for
incoming connections
Check to skip first hex zeros
The port number used to listen for incoming connections
Disconnects client after the specified timeout of inactivity
Explanation
Server's address to which the client will have to connect to
The port number of the remote server
Indicates the time period between reconnection attempts
130