Teltonika RUT955 User Manual page 69

RUT955 User's Manual
7.2.2.2 Advanced
The Advanced Setting tab offers you the ability to configure more advanced settings for each of the protocols. If
you are unsure of how to alter these settings, it is highly recommended to leave them unchanged or consult a trained
professional.
7.2.2.2.1 Static
The Advanced Settings tab will change in accordance to which network protocol is selected. For the Static protocol
you can turn NAT on or off, override the router's MAC address, MTU and define the gateway metric. You will find
additional information on how to define these settings bellow.
Field name
1. Disable NAT
2 Override MAC address
3. Override MTU
4. Use gateway metric
Teltonika Solutions
Sample value Explanation
On/Off Toggle Network Address Translation (NAT) on or off for the
selected network interface
00:51:33:77:56:17 Override MAC address of the WAN interface. If your ISP gives you
a static IP address it might also bind it to your computers MAC
address (i.e. that IP will only work with your computer but not
with your router). In this field you can enter your computer's
MAC address and fool the gateway in to thinking that it is
communicating with your computer
1500 Maximum Transmission Unit (MTU) – specifies the largest
possible size of a data packet
0 The WAN configuration by default generates a routing table
entry. In this field you can alter the metric of that entry
69