Teltonika RUT955 User Manual page 94

RUT955 User's Manual
7.6.5.2 New Forward Rule
Field Name
1. Name
2. Source
3. Destination
7.6.5.3 Source NAT
Source NAT is a specific form of masquerading which allows fine grained control over the source IP used for
outgoing traffic, for example to map multiple WAN addresses to internal subnets.
Field Name Possible values
1. Name Rule's name
2. Protocol TCP/UDP/Any/ICMP/Custom
3. Source GRE / HOTSPOT / L2TP / LAN /
PPTP / VPN / WAN
4. Destination GRE / HOTSPOT / L2TP / LAN /
PPTP / VPN / WAN
5. SNAT Rewrite to source IP
192.168.55.55, port 15465
6. Enable Enable/Disable
Teltonika Solutions
Possible values
Rule's name
GRE / HOTSPOT / L2TP / LAN
/ PPTP / VPN / WAN
GRE / HOTSPOT / L2TP / LAN
/ PPTP / VPN / WAN
Explanation
Name of the rule, used for easier management
Protocol of the packet that is being matched against traffic rules
Match incoming traffic from selected address family only
Forward incoming traffic to selected address family only
SNAT (Source Network Address Translation) rewrites packet's
source IP address and port
Makes the rule active/inactive
Explanation
Name of the rule, used for easier management
Match incoming traffic from selected address family only
Forward incoming traffic to selected address family only
94