How Do I Set Up A Backup Link - Teltonika RUT955 User Manual

RUT955 User's Manual
7.2.3

How do I set up a backup link?

First you must select a main link and choose one or two backup links in the WAN section. Then push the "Edit"
button and configure your WAN and Backup Wan settings to your liking.
Click Save after you have made your changes and wait until the settings are applied. You can monitor main/backup
WAN status in the Status -> Network Information -> WAN page. If everything is working correctly you should see
something like this:
The above picture shows the status for the Mobile Backup WAN configured on a wired main link. You can now
simulate a downed link by simply unplugging your Ethernet WAN cable. When you've done so you should see this:
When the main connection is down, all the traffic will go through the backup WAN interface (in this case, mobile.)
When you plug the cable back in, the connection will be restored and the traffic will again go through the main WAN
interface (in this case, wired.)
Teltonika Solutions
74