Teltonika RUT955 User Manual page 165

RUT955 User's Manual
Field name
Setup configuration message
1.
Generate SMS
2. WAN
3. Interface
4. Primary SIM card
5. Mobile connection
6. APN
7. Dialing number
8. Authentication
method
9. User name
10. Password
11. Service mode
12. LAN
13. IP address
14. IP netmask
15. IP broadcast
Send Message Settings
16. Phone number
17. Authorization method
This is an example of only one scenario but you can also send different Network and VPN settings. The settings
being sent are the same as they would be configured on your router locally, therefore, you can find information on what
different Network and VPN parameters do in
Teltonika Solutions
Values
New / From current
configuration
Checked / Unchecked
Mobile / Wired
SIM1 / SIM2
PPP / NDIS / NCM / QMI
Operator's APN
*99#
CHAP / PAP / None
"admin"
"•••••"
Auto
4G (LTE) only
3G only
2G only
Enable/Disable
"192.168.1.1"
"255.255.255.0"
"192.168.1.255"
"+37061111111"
No authorization
By serial
By router admin password
7 and 9.7 sections of this document.
Notes
Generate new SMS settings or use current device
configuration
Include configurations for WAN (Wide Area Network)
Interface type used for WAN (Wide Area Network)
connection
SIM card that will be used as primary
An underlying agent that will be used for mobile data
connection creation and management
(APN) is the name of a gateway between a GPRS or 3G
mobile networks and another computer network,
frequently the public Internet
A phone number that will be used to establish a mobile
PPP (Point-to-Point Protocol) connection
Select an authentication method that will be used to
authenticate new connections on your GSM carrier's
network
User name used for authentication on your GSM carrier's
network
Password used for authentication on your GSM carrier's
network
Your network's preference. If your local mobile network
supports GSM (2G), UMTS (3G) or LTE (4G) you can specify
to which network you prefer to connect to
Include configurations for LAN (Local Area Network)
IP address that the remote router will use on LAN
A subnet mask that the remote router will use to define
how large the LAN network is
A logical address at which all devices connected to a
multiple-access communications network are enabled to
receive datagrams
Phone number of the router that will receive the
configuration
What kind of authorization to use for remote configuration
165