RUT955 User's Manual
7.2 WAN
7.2.1
Operation Mode
The WAN window lets you determine how the router will be connecting to the internet. You can chose between
three types of WAN – Mobile, Wired and Wi-Fi.
Field Name
Possible values
1. Main WAN
Wired/Mobile/Wi-Fi
2. Backup WAN /
Enable/Disable
Load Balancing
3. Interface Name
WAN/WAN2/WAN3
4. Protocol
Static/DHCP/PPPoE
5. IP Address
192.168.90.66
6. Sort
7.2.2
Common Configuration
You can further configure each of your WAN interfaces by clicking the 'edit' button found at the far right of the
WAN table next to each interface:
It will open the Common Configuration window where you can select the protocol to be used with your by your
WAN interface, configure your backup WAN settings, set up IP aliases, custom DNS servers and more.
Teltonika Solutions
Explanation
Allows you to select the main WAN
Allows you to select one or two interface to act as your backup WAN
Names of the WAN interfaces
The protocol used by a WAN interface
WAN IP address
-
Allows you to sort table rows and change interface priority (i.e., the
highest interface has the highest priority)
66