Auto Reboot; Ping Reboot - Teltonika RUT955 User Manual

RUT955 User's Manual

9.15 Auto Reboot

9.15.1

Ping Reboot

Ping Reboot function will periodically send Ping command to server and waits for echo receive. If no echo is
received router will try again sending Ping command defined number times, after defined time interval. If no echo is
received after the defined number of unsuccessful retries, router will reboot. It is possible to turn of the router
rebooting after defined unsuccessful retries. Therefore this feature can be used as "Keep Alive" function, when router
Pings the host unlimited number of times. Possible actions if no echo is received: Reboot, Modem restart, Restart
mobile connection, (Re) register, None.
Field name
1. Enable
2. Action if no echo is
received
3. Interval between pings
4. Ping timeout (sec)
5. Packet size
6. Retry count
8. Interface
7. Host to ping from SIM 1
8. Host to ping from SIM 2
Teltonika Solutions
Explanation
This check box will enable or disable Ping reboot
feature.
Action after the defined number of unsuccessful
retries
Time interval in minutes between two Pings.
Time after which consider that Ping has failed.
This box allows to modify sent packet size
Number of times to try sending Ping to server after
time interval if echo receive was unsuccessful.
Interface used for connection
IP address or domain name which will be used to
send ping packets to. E.g. 127.0.0.1 (or
www.host.com if DNS server is configured
correctly)
IP address or domain name which will be used to
send ping packets to. E.g. 127.0.0.1 (or
www.host.com if DNS server is configured
correctly)
Notes
Ping Reboot is disabled by
default.
No echo reply for sent ICMP
(Internet Control Message
Protocol) packet received
Minimum time interval is 5
minutes.
Range(1-9999)
Should be left default, unless
necessary otherwise
Minimum retry number is 1.
Second retry will be done after
defined time interval.
Ping packets will be sending
from SIM1.
Ping packets will be sending
from SIM2.
190