Sms Utilities - Teltonika RUT955 User Manual

RUT955 User's Manual

9.9 SMS Utilities

RUT955 has an extensive amount of various SMS Utilities. The SMS Utilities section is subdivided into 6 subsections:
SMS Utilities, Call Utilities, User Groups, SMS Management, Remote Configuration and Statistics.
9.9.1
SMS Utilities
The SMS Utilities tab contains a list of rules that perform certain actions when they are activated by SMS messages.
The figure above is an illustration of the SMS Utilities rules list. The entire list contains 26 rules but you are also be
provided with the possibility to configure custom ones.
All default configuration options are listed below:
- Reboot
- Get status
- Get I/O status
- Get OpenVPN status
- Switch WiFi on / off
- Switch mobile data on / off
- Switch OpenVPN on / off
- Change mobile data settings
- Get list of profiles
- Change profile
- SSH access control
How to execute a rule:
To execute a rule, just send an SMS message to the router's SIM card number with the rules' SMS Text, e.g., if you
send a message with the text "reboot", the router will reboot provided the selected Authorization method is "No
authorization". However, if there is an Authorization method present you will need to include the "Authorization key"
in the text message. This "Authorization key" depends on the chosen Authorization method, i.e.., if the method is "By
serial", the "Authorization key" is the router's serial number, if the method is "By router admin password", the
"Authorization key" is the router's admin password. The authorization "key" must precede the activation text and they
must be separated by a space. For example, if the chosen Authorization method is "By router admin password" and the
password is "admin01", the entire message should look like this: "admin01 reboot". The same applies to "By serial"
authorization.
Teltonika Solutions
- Web access control
- Restore to default
- Force SIM switch
- GPS coordinates
- GPS on / off
- FW upgrade from server
- Config update from server
- Switch monitoring on / off
- Monitoring status
- UCI API
149