In this section we will look over the various firewall features that come with RUT955.
7.6.1
General Settings
The router's firewall is a standard Linux iptables package, which uses routing chains and policies to facilitate control
over inbound and outbound traffic.
Field Name
Possible values
1. Drop Invalid
Checked/Unchecked A "Drop" action is performed on a packet that is determined to be invalid
packets
2. Input
Reject/Drop/Accept
3. Output
Reject/Drop/Accept
4. Forward
Reject/Drop/Accept
*DEFAULT: When a packet goes through a firewall chain it is matched against all the rules of that specific chain. If no rule matches said packet, an according
Action (Drop, Reject or Accept) is performed
Accept – Packet gets to continue down to the next chain;
Drop – Packet is stopped and deleted;
Reject – Packet is stopped, deleted and, differently from Drop, an ICMP packet containing a message of rejection is
sent to the source of the dropped packet.
Teltonika Solutions
Explanation
DEFAULT* action that is to be performed for packets that pass through the
Input chain
DEFAULT* action that is to be performed for packets that pass through the
Output chain
DEFAULT* action that is to be performed for packets that pass through the