Teltonika RUT955 User Manual page 203

RUT955 User's Manual
9.20.3.6 Periodic Control
Periodic control function allows user to set up schedule by which the outputs are either turned ON or OFF at specific
time.
After clicking on ADD button (Or Edit, if the rule is already created) you get the second periodic output configuration
page with extra parameters to set.
Field name
1. Enable
2. Output
3. Action
4. Action timeout
5. Timeout (sec)
6. Mode
7. Hours
8. Minutes
9. Days
9.20.3.7 Scheduler
This function allows you to set up the periodical, hourly schedule for the outputs. You can select on which week
Teltonika Solutions
Sample
Enable/Disable
Digital/Digital isolated/Analog
On / Off
Enabled / Disabled
10
Fixed / Interval
15
25
Monday
Explanation
Enable this output rule
Specify the output type
Specify the action to be taken
Enable timeout for this rule
Specifies after how much time this action should end.
Specify the mode of output activation
Specify the hour for rule activation
Specify the minute for rule activation
Select the week days for rule activation
203