Call Utilities - Teltonika RUT955 User Manual

RUT955 User's Manual
9.9.2

Call Utilities

Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from
your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that
in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.
There is only one default rule (Reboot) configured and it is disabled. To make a new rule click the "Edit" button
located next to the one default rule (as shown in the example below) or make an entirely new entry for you Call Rules
list by adding a rule from the New Call Rule tab.
Field name
1. Enable
2. Action
3. Allowed users
4. Get status via
SMS after reboot
Teltonika Solutions
Possible values
Checked / Unchecked
Reboot / Get Status / Turn WiFi on/off /
Turn mobile data on/off / Turn Output
on/off
From all numbers / From group / From
single number
Checked / Unchecked
Explanation
Enables the rule
Action to be taken after receiving a call
Limits action triggering. If From group is checked,
you will prompted to select a User Group (you
will information on how to configure User Groups
in the 9.9.3 section of this document).
If From single number is selected, you will be
prompted to enter the sender's number
Enables automatic message sending with router
status information after reboot. If this is checked,
you will be prompted to enter recipient's phone
number
159