Teltonika RUT900 User Manual

Hspa+ router

Hide thumbs Also See for RUT900:

Download this manual

To enter router's Web interface type

http://192.168.1.1

Use the following parameters when prompted for authentication:

User name: admin

Password: admin01

Configuration Wizard will start after logging in. It is necessary to complete Configuration Wizard to

setup router to correct mode. You can leave default settings but it is strongly recommended that you change

the password and enable Wireless Security.

Go to Status > Network Information and pay attention to Signal Strength. To maximize the

performance try adjusting antennas or changing location of your device to achieve best signal conditions.

This sign on the package means that it

is necessary to read the User's

Manual before you start using the

device.

Please visit our web site

www.teltonika.lt

in your internet browser.

This sign on the package means that all

used electronic and electric equipment

should not be mixed with general

household waste.

for more information

RUT900 HSPA+ Router

ISO 9001

CERTIFIED

ORGANISATION

Quick start guide v1.1

Page 1 You can leave default settings but it is strongly recommended that you change the password and enable Wireless Security. RUT900 HSPA+ Router Go to Status > Network Information and pay attention to Signal Strength. To maximize the performance try adjusting antennas or changing location of your device to achieve best signal conditions.
Page 2: Front Panel
Front panel Back panel Configure your computer (using Windows 7) Enable the wireless network connection ( o to Start > Control Panel > Network and Internet > Network and Sharing Center. In the left panel click Change adapter settings link. Right click on Wireless Network Connection and select Enable).

Rut950