Troubleshoot - Teltonika RUT955 User Manual

RUT955 User's Manual
4. Confirm new password
5. Language
6. IPv6 support
7. Show mobile info at login page
8. Show WAN IP at login page
9 On/Off LEDs
10 Restore to default
Important notes:
The only way to gain access to the web management if you forget the administrator password is to reset the
device factory default settings. Default administrator login settings are:
User Name: admin
Password: admin01
10.3.2

Troubleshoot

Field name
1. System log level
2. Save log in
3. Include GSMD information
4. Include PPPD information
5. Include Chat script information
6. Include network topology
information
7. System Log
Teltonika Solutions
Re-enter your new administration password.
Website will be translated into selected language.
Enable IPv6 support on router
Show operator and signal strength at login page.
Show WAN IP at login page.
If uncheck, all routers LEDs are off.
Router will be set to factory default settings
Explanation
Debug level should always be used, unless instructed otherwise.
Default RAM memory should always be used unless instructed otherwise.
Default setting – enabled should be used, unless instructed otherwise.
Default setting – disabled should be used, unless instructed otherwise.
Default setting – enabled should be used, unless instructed otherwise.
Default setting – disabled should be used, unless instructed otherwise.
Provides on-screen System logging information. It does not, however,
substitute troubleshooting file that can be downloaded from System ->
Backup and Firmware menu.
214