To Modify Clock (After Previously Set); To Set Date; To Modify Date (After Previously Set) - Tork DTS200A Installation & Operation Manual

Press MIN to advance the time in minutes to
desired setting.
Press DAY key to advance to today's day.
When present hour, minute and day are shown,
press ENTER.
1.1 TO MODIFY THE CLOCK
(If the unit was already running the program, then
unit will show the day of the week, hours, minutes).
Press MODE key. Display shows current time and
day with colon NOT flashing and CLK symbol at
the bottom.
Use HOUR, MIN, and DAY key to modify or alter
the information. You must press ENTER to make
the changes effective.

2.0 TO SET DATE

If you are setting for the first time, display will
show
Press MONTH key. Display will show 010194
Advance month to desired setting.
Press DATE key to advance date.
Press YEAR key to advance to correct year.
When desired MONTH, DAY and YEAR are on
the display, press ENTER.
2.1 TO MODIFY OR CHANGE DATE
Press MODE key until display shows DATE. Use
MONTH, DATE and YEAR key to modify MONTH,
DATE, YEAR. Press ENTER.
DATE
3