Holiday Dates - Tork DTS200A Installation & Operation Manual

Press MODE key till display shows
Unit is ready to be programmed for starting
MONTH and DATE for season 1.
Press MONTH and DATE keys to set MONTH and
DATE for starting of season 1. Press ENTER.
Display now shows
Use MONTH and DATE key to set ending MONTH
and DATE for season 1. Press ENTER.
Set the start and end for other 3 seasons if
desired.
To delete an entry, press DLETE key.
NOTE: If for any reason you set starting MONTH and
DATE and forget to set ending MONTH and DATE,
that season becomes invalid. Unit will erase the start-
ing date.
5.0 SET INDIVIDUAL HOLIDAY DATES
Press MODE key until display shows
SEASON 1
SEASON 1
5
H