Schedule Set Mode; Setting Hours, Minutes, And Days - Tork DGS100A Instruction Manual

Follow the same procedures above to set the second
signal or duty cycle entries .
Press MODE key to advance to next screen .

6.0 SCHEDULE SET MODE

Press MODE key until display shows:

6.1 SETTING HOURS, MINUTES, AND DAYS

Note: A schedule is needed for each event . If a typical
ON/OFF pair is required, use SCH 01 for the ON
event and SCH 02 for the OFF event .
Press the HOUR, and MIN keys to set the desired time .
Press EVENT to set desired event
(ON or OFF, C1, or C2)
Note: C1 or C2 will not be displayed if the duty cycle
durations are not set in Step 5 .
Press DAY to set desired day(s) .
Note: With each DAY button push a different group of
days will appear .
6