Daylight Saving; To Set Date - Tork DG100 Instructions Manual

Press DAY/MONTH key to select today's day. Press
HOUR key to set present hour (check AM/PM). Press
MIN key to set present minute. Press ENTER key. Unit
now stores present time. Seconds are set to zero.

DAYLIGHT SAVING

The user may select either standard U.S. option or no
daylight saving at all.
1. U.S. OPTION: Daylight saving is automatically set
when entering the current month/date/year. The
unit will add one hour on the first Sunday in April,
and subtract one hour on the last Sunday in
October. You never need to look up the tables, or
enter the spring and fall correction dates yourself.
2. NO DAYLIGHT SAVING: The unit will not be con-
figured for daylight saving time corrections by not
entering the month/date/year.

TO SET DATE

NOTE: ENTER ONLY IF AUTOMATIC DAYLIGHT
SAVING IS DESIRED. IF NOT REQUIRED, DO NOT
SET DATE. INSTEAD, SKIP THE FOLLOWING
SECTION AND PRESS MODE KEY UNTIL DIS-
PLAY SHOWS SET.
Press MODE key until display shows DATE.
Press MONTH key to set present month. Press DATE
key to set today's date. Press YEAR key to set present
year. Press ENTER key. Unit now stores present date.
Note: If unit has correct entry for the calendar, then
the unit will go into the SET mode. If the calendar has
an incorrect entry, then the unit will stay in the DATE
mode, with MM--YY displayed, signifying that the
date does not correspond with the month, and/or
year, i.e. Feb. 31,1999. If this occurs, set the correct
date, and then press ENTER.
DATE
4