Lcd Voltage Display; Status Lights; Inputs And Outputs; Status Codes - JVA Z14 Installation And User Manual

JVA ELECTRIC FENCE SYSTEMS

4.2 LCD Voltage Display

The display on the JVA Z14 shows the voltage at the fence and return terminals.
The left is the return and the right is the feed voltage. Arrows at the top of the display
indicate that the unit is in conventional mode.
For Bi-Polar fences, the left side is the positive return wire voltage and the right is
the negative wire return voltage.
The LCD also shows the programming option and current setting when in
programming mode. This allows the programming options settings to be checked
easily.

4.3 Status Lights

Power On whenever the unit has power
Armed
On when the unit is armed (pulsing), will flash when in Low Voltage
mode
Fence
On when there is a fence alarm
Gate On when there is a gate alarm
Status
The number of times the Status Light flashes indicates the status of
the energizer. See the table in section 7.2 – Status Codes.

4.4 Inputs and Outputs

See Technical Information page 21.

4.5 Status Codes

See Technical Information page 22.
7