JVA Z14 Installation And User Manual page 19

JVA ELECTRIC FENCE SYSTEMS
PAE 212
Group Installation notes
1. If an Energizer hasn't been programmed as a Master or a Slave, it is set as
"Stand alone" by default.
2. All energizers need an appropriate high voltage circuit earth connection.
3. Allow for the heat load of multiple Energizers mounted inside a cabinet,
approximately 10W each.
4. Use shielded or twisted pair cable for the group keypad wiring.
Z Series Energizer
Z Series Energizer
Group Mode Linking
Z Series Energizer
Z Series Energizer
17