Specifications - JVA Z14 Installation And User Manual

JVA ELECTRIC FENCE SYSTEMS

3. SPECIFICATIONS

Specification Name
Energizer Output Voltage
Peak Output Energy
Pulse Rate
12v Dc Power Consumption
Ac Power Input
Battery Charger Output
Siren and Strobe Outputs
Enclosure
Size
Weight – packed, no battery
Weight – packed, with battery 4.25kg
• There are no user-serviceable parts in this unit.
• The installer is reminded that high voltages are
retained for a while after switching off, and to wait
for at least 10 minutes before opening the case.
• Before working on the high voltage wiring of
an electric fence, it is recommended that the
energizer be turned off and an intentional short
circuit be placed from the fence live wires to earth.
This is a sensible precaution against the energizer being turned on by others
or malfunctioning while work on the fence is in progress.
• This appliance is not intended for use by persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
Specification
9kV peak no load
5.0 Joules at 500 Ohms, limited to 2.5J in group
mode
Locked at 0.9 Hz
Energizer On – 550mA Average, 700mA peak
Energizer Off – 28mA (40mA with keypad)
Not including keypad or auxiliary power
16Vac 1A
Float voltage 14V, 700mA , short circuit and
reverse polarity protection
Self-resetting fuse protection, switched 12V,
rated at 30W (combined)
IP4x ABS plastic
300mm high, 190mm wide, 115mm deep
1.9kg
WARNING
5