Technical Information - JVA Z14 Installation And User Manual

JVA ELECTRIC FENCE SYSTEMS

7. TECHNICAL INFORMATION

IN1
Label Type
IN1 2 Way Energizer control input (dry contact) is in parallel with the key
switch input, SW2.
Can be used for a remote switch or a radio receiver. The receiver
may be powered from the keypad +12V terminal.
Gate 2 Way Normally open. When the unit is armed and the gate is opened,
it will trigger the gate alarm. Alternatively, the gate input can
be programmed to make the energizer alternate between Low
Voltage and High Voltage mode.
Keypad 3 Way Supplies power and data line for an external keypad. The +12
source on these terminals is protected with 1A self-resetting fuse.
Siren 2 Way Switched 12V output. Low side switched. 30W max (including
Strobe). A buffer relay should be used when connecting these
outputs to an alarm panel.
Strobe 2 Way Switched 12V output. Low side switched. 30W max (including
Siren). A buffer relay should be used when connecting these
outputs to an alarm panel.
AC IN 3 Way 16Vac power input. Fused via F3, 2A self-resetting fuse.
Batt 2 Way Connect red lead to battery positive (+) terminal. 12V dc or
battery connection via F1 (3 Amp self-resetting fuse).
Dat Gnd +12
–
Gate Keypad Siren
Low Voltage Terminals
+ + L N
–
Strobe 16V AC Input
Description
21