Keypad (Optional); Keypad Lcd Screen; Internal Beeper/Keypad Beeper - JVA Z14 Installation And User Manual

4.6 Keypad (0ptional)
Up to 3 keypads can be used to remotely monitor and control the Z14. A keypad is
required to set the programmable options for installer programming options. See
pages 33–35.

4.7 Keypad LCD Screen

The JVA Z14 can function with the supplied side-mounted key switch. However, the
user has the option of purchasing the LCD keypad.
This state-of-the-art keypad has a liquid crystal display screen, which is easier to
understand than coded LEDs as it provides detailed information regarding energizer
status in easy-to-read text.
For information on how to control the Z14 via the keypad, see section 6, page 18.

4.8 Internal Beeper/Keypad Beeper

Depending on the chime setting, the internal beeper and keypad beeper will sound
when there is a fence alarm, a gate alarm, a door chime or a general alarm. Should
the battery voltage run low, the keypad will always beep 4 times before the energizer
automatically enters Low Voltage mode to preserve the battery. Should the mains
fail, it will not beep until it enters Low Voltage mode.
8
JVA ELECTRIC FENCE SYSTEMS