10 Operating the LCD Menu
SN: Serial number.
MAC: Physical address.
The power value indicated by each column of the histogram represents
the average value of the power during the related unit interval.
10.6
Starting and Stopping the Inverter
Main Screen (Press ENTER) →Menu (Press ×1) →Start/Stop (Press ENTER)
Press
to choose "Start"/"Stop" and press
ENTER
to confirm the choice.
Confirm your choice by pressing ENTER.
The Restart item will appear only if an unrecoverable fault occurs.
10.7
Inputting Password
The parameter settings are protected by the password. If you want to set the
inverter's parameters, you have to input the correct password.
1.
Press
ENTER
2.
Press
to move the cursor to "Set-param" menu item and confirm by
pressing ENTER.
76
to enter into "Menu" screen.
User Manual