Sungrow SG3KTL-EC User Manual page 13

User Manual
Lethal voltage!
PV arrays will produce electrical energy when exposed to sunlight and thus
can create an electrical shock hazard.
Wiring of the PV arrays should be performed only by qualified personnel.
All cables must be firmly attached, undamaged, properly insulated and
adequately dimensioned.
During Inverter Operation
Do not open the enclosure when the inverter is under voltage. There is a highly
unlikely risk of explosion in very specific cases of fault. The enclosure will protect
persons and property from such an explosion, only if it is correctly sealed.
There is a risk of inverter damage or personal injury!
DO NOT disconnect DC connectors while the inverter is under AC load! First
de-energize the device from dual power sources and then verify that there is
no voltage present.
There is a risk of burn!
DO NOT touch the device hot parts (such as heat sink) during operation.
Only LCD display panel and DC switch can be touched during inverter
operation.
1 Safety Instructions
3