Feed Setting; Pf Setting; Setting Communication Parameters - Sungrow SG3KTL-EC User Manual

10 Operating the LCD Menu

10.9.3 Feed Setting

Main Screen (Press ENTER)→Menu screen (Press
ENTER)→Enter password (Press ENTER)→Set-param (Press ENTER, Press ×2)→
Feed Setting (Press ENTER)
/
Press to enable or disable the feed setting
and Press ENTER

Press to move cursor and Press
value. Confirm the settings by Pressing ENTER.

10.9.4 PF Setting

Main Screen (Press ENTER)→Menu screen (Press
ENTER)→Enter password (Press ENTER)→Set-param (Press ENTER, Press ×3)→
PF Setting (Press ENTER)

Press to move cursor and Press
power factor. Confirm the settings by Pressing
ENTER.

10.9.5 Setting Communication Parameters

Main Screen (Press ENTER)→Menu screen (Press ×2)→Set-param (Press
ENTER)→Enter password (Press ENTER)→Set-param (Press ENTER, Press
×4)→Com-param (Press ENTER)

Press to move cursor right and Press
the appropriate value. Confirm settings by Pressing
ENTER.
The range of communication address is 1...247.
WiFi-EN ON: Wi-Fi function enabled.
WiFi-EN OFF: Wi-Fi function disabled.
80
to confirm.

to set the

to set the

to set
User Manual
×2)→Set-param (Press

×2)→Set-param (Press
