Ethernet Configuration; Starting/Stopping The Inverter; Viewing The Error Record; Setting The Time - Sungrow SG2K5-S User Manual

7 LCD Operation

7.5.11 Ethernet Configuration

The Ethernet setting is reserved for later usage.
Touch ENT to select and press ENT to confirm.
OFF: The IP address should be assigned manually.
ON: Automatically assign IP address from the home
router.
Touch ESC to switch between the DHCP and the IP
interfaces.

7.6 Starting/Stopping the Inverter

Main Screen (Press ENT)→Menu (Touch ESC)→ON/OFF (Press ENT)
Touch ENT / ESC to select and press ENT to
confirm.
Confirm your selection by pressing ENT.

7.7 Viewing the Error Record

Main Screen (Press ENT)→Menu (Touch ESC)→Error Record (Press ENT)
Scroll pages by touching ENT / ESC.
3 records can be displayed on each page and 20
records at most for all.
Press ESC to exit.

7.8 Setting the Time

The correct system time is very important. If there is deviation between the
system time and the local time, the inverter will not operate normally. The clock
is in 24-hour format.
50
Confirm turn on?
1 15/01/21 09:10:12
2 15/01/21 09:10:08
3 15/01/21 09:11:08
User Manual
DHCP:
OFF ON
IP:
192.168.001.100
ON OFF
Confirm turn off?
010
004
005