User Manual
10.7
Starting and Stopping the inverter
Main Screen (Press ENTER)→Menu (Press ×2)→Start/Stop (Press ENTER)
Press
to choose "Start"/"Stop" and press
confirm the choice.
Press
ENTER
to confirm your choice.
The Restart item will appear only when a permanent fault occurs.
10.8
Entering Password
The parameter settings are password-protected. You can see the inverter's
parameters or set the parameters if you input a default password A (111111).
You can set all parameters of the inverter if you input a dedicated password B.
Please ask SUNGROW or your dealer for this password.
1.
Press
ENTER
2.
Press
to move the cursor to "Set-param" menu item and confirm by
pressing ENTER.
to enter into "Menu" screen.
10 Operating the LCD Menu
ENTER
to
85