Sungrow SG3KTL-EC User Manual page 31

User Manual
In order to avoid electrical shock or other injury, inspect if there is electricity
or plumbing installations before drilling holes.
5. Attach the wall bracket to the wall with the supplied expansion bolt set. The
torque for fastening the nut should be at least 35 Nm.
1
2
3
6 5 4
Fig. 4-4 Fasten the Wall bracket against Concrete Wall
6. Lift up the inverter above the wall bracket with the help of other people and
then slide down. Make sure that the grooves on the back of the inverter and
the hooks on the wall bracket engage perfectly, as shown in Fig. 4-5.
The installers must wear gloves to avoid scratches when mounting the
inverter.
No.
1
2
3
4
5
6
Fig. 4-5 Installing the Inverter
4 Securing Inverter to the Wall
Description
Concrete wall
Expansion cylinder (M10x80)
Wall bracket
Washer
Spring washer
Hexagonal socket nut
21