Energy Adjustment; Setting Communication Parameter; Starting/Stopping The Inverter - Sungrow SG2K-S User Manual

7 LCD Operation

7.5.7 Energy Adjustment

If the accumulative value "E-total" displayed on inverter screen is different from
the value indicated on the metering device, you should adjust the energy
deviation.
(Energy Adj. value) = (Real measured value) - (E-total reading value)
Touch ENT for modification.
Touch to change the value and touch ENT to move the cursor.
to select "Enter" and touch ENT to confirm settings.
Touch
The "+" can be changed to "-" by touching
The adjustment ranges from -9999 kWh to +9999
kWh.

7.5.8 Setting Communication Parameter

Touch ENT for modification.
Touch to set the appropriate value and
touch ENT to move the cursor.
to select "Enter" and touch ENT to
Touch
confirm settings.
Device address range: 1-246.

7.6 Starting/Stopping the Inverter

Main Screen (Touch ENT) → Menu (Touch
Touch to select and touch ENT to confirm.
Confirm your selection by touching ENT.
62
.
Energy Adj.
Enter
) → ON/OFF (Touch ENT)
User Manual
+0000 kWh
Esc