6 Visiting And Configuring The Webserver; User And Authority; Login Interface - Sungrow SG3KTL-EC User Manual

6 Visiting and Configuring the
Webserver

6.1 User and Authority

The Webserver provides user permission and installer permission. To avoid two or
more persons to change the inverter configurations at the same time, only one
person can login to Webserver at a time.
Therefore, once a person logs in and does not exit, other person cannot log in
anywhere else. Close the webpage when logging out. After logging out, it will take
at most 4s until the user log in again.

6.2 Login Interface

Query the inverter IP address corresponding to the instructions in "10.9.5 Setting
Communication Parameters".
Open the browser and input the inverter's IP
User should select username user after signing in with the default sign in password
of 1111. User can change the password after signing in.
After inputting the username and password, press "Sign in" or "Enter" to log in.
If there is no operation for 10 minutes, system will automatically return to
the login interface.
address.
49