For Professional User - Sungrow SG3KTL-EC User Manual

11 Viewing PV Plant Information
4. View the plant information via SolarInfo Home APP in remote "[Login]" mode,
see "Visit in "Remote [Login]"mode".

11.1.2 For Professional User

The following table shows the three scenarios of connection for professional user.
No. Description
Scenario 1 The inverter is connected to router,
and the router is connected to the PC.
The router cannot allocate IP address
automatically.
Scenario 2 The inverter is connected directly to
PC.
Scenario 3 The inverter is connected directly to
the net port.
1. Connect the communication cable.
2. Set the DHCP to OFF and set the IP address, subnet mask, gateway, DNS1 and
DNS2, as shown in the following figure.
Acquire the IP, subnet mask, gateway, DNS1 and DNS2 from the network
professional. The information shown below is for reference only.
84
User Manual
Remarks
The computer
SolarInfo Bank only when the
router can access to Internet.
The computer cannot visit
SolarInfo Bank.
Contact service engineer of
SUNGROW when the inverter
and the PC are in different
subnets.
can visit