Starting And Stopping The Inverter; Advanced Settings; Inputting Password - Sungrow SH5K-20 User Manual

10 Appendix I: LCD Operation
(2) The value of battery SOH will be displayed as "--" for GCL batteries that
do not have this parameter. The SOC value for lead-acid batteries is for
reference only.
(3) The DRM0 state will prohibit the "ON".
(4) The "Restart" option will appear only if an unrecoverable fault occurs.
The demand response mode (DRM), reactive power settings about
Qt, Q(p), Q(u), and power derating settings are valid only for
Australia.
10.3

Starting and Stopping the Inverter

Notice:
The Restart item will appear only if an unrecoverable
fault occurs.
Confirm your choice by pressing ENT.
When the DRM state is DRM0, the "ON" option will
be prohibited.
10.4

Advanced Settings

10.4.1 Inputting Password

The parameter settings are protected with a password. If you want to set the
inverter's parameters, you have to input the correct password.
Press to add the value and Press
password 111. Press
76
or
Confirm 'ON'?
ENT to confirm the password and enter the submenu.
ON / OFF
Confirm 'OFF'?
or
ENT to move the cursor to input the
User Manual
ON
OFF
Restart
Confirm 'Restart'?
The DRM0 state will
prohibit the 'ON'!