Starting/Stopping The Inverter; Starting The Inverter; Stopping The Inverter; Energy Output Deviation Adjustment - Sungrow SG500MX Operation Manual

6 LCD Menu Operation
6.10

Starting/Stopping the Inverter

Usually, the inverter will start automatically when the grid-connected requirements
are met.
Follow either of the two ways below to start/stop the inverter through the LCD screen:

Tap "Start/Stop" from the default menu.

Tap "Start/Stop" from the Function menu.

6.10.1 Starting the Inverter

In Start/Stop screen, click Start and a "Confirm start" window appears.
Tap "Enter" to start the inverter while tap "Cancel" to cancel the operation.

6.10.2 Stopping the Inverter

In Start/Stop screen, click Stop and a "Confirm stop" window appears.
Tap "Enter" to stop the inverter while tap "Cancel" to cancel the operation.
6.11

Energy Output Deviation Adjustment

Energy output deviation adjustment is useful when the total power output displayed in LCD
(E-total) is different from the reading value of the external power measuring device (e.g. an
ammeter).
(Energy-adj value)= (Real measured value)-(E-tot reading value).
To adjust the date or time, proceed as follow:
Tap "Function" from the default menu;
Step 1
Tap "Set-parameter";
Step 2
Tap "Sys-parameter" after entering the correct password;
Step 3
Step 4 Tap "E-total adjust" and enter into the energy output deviation adjustment sub-menu;
26
Operation Manual