Sungrow SG3KTL-EC User Manual page 95

User Manual
3. Wait for about 10 minutes and the icon as shown in the figure below will
appear on the main LCD display interface. The SolarInfo Bank connects to the
inverter successfully.
4. (Optional) Do this step only for scenario 2. Proceed as follows to configure
the IP address and subnet mask of the computer.
− For Windows 7 or higher version, right click the [Network and Internet] icon
on the right corner of the desktop, click [Network and Sharing Center], open
[Local Area Connection], click [Properties], double click [Internet Protocol
Version 4 (TCP/IPv4)], click [Use the following IP address].
−
For Windows XP, right click [My Network Places], open [Local Area Connection],
click [Properties], and double click [Internet Protocol (TCP/IP), and then click
[Use the following IP address].
11 Viewing PV Plant Information
85