Hood; Opening The Hood - Jeep Wrangler2018 Owner's Manual

Hide thumbs Also See for Wrangler2018:

Table of Contents

4. Reinstall the windshield wiper arms and using the

provided 15mm socket, reinstall the two hex bolts

securing the wiper arms. Secure them until they are

snug, careful not to over tighten.

5. Replace the protective caps over the wiper arm hex bolts

and push gently until they snap into place.

Protective Cap Over Wiper Bolt

GETTING TO KNOW YOUR VEHICLE 153

HOOD

Release both the hood latches.

Hood Latch Locations

Raise the hood and locate the safety latch, located in the

middle of the hood opening. Push the safety latch to the

left side of the vehicle, to open the hood. You may have to

push down slightly on the hood before pushing the safety

latch. Insert the support rod into the slot on the hood.

Table of Contents