Bulb Replacement - Jeep Wrangler2018 Owner's Manual

Hide thumbs Also See for Wrangler2018:

Table of Contents

Premium Fog Lamps

Rear Premium LED Tail Lamps

Rear Base Tail Lamp Stop/Tail/Turn Bulb

Rear Base Tail Lamp Backup Bulb

Rear Base Tail Lamp Side Marker

Center High-Mounted Stop Lamp

License Lamp

NOTE: Numbers refer to commercial bulb types that can be purchased from an authorized dealer.

If a bulb needs to be replaced, visit an authorized dealer or refer to the applicable Service Manual.

Bulb Replacement

NOTE: Lens fogging can occur under certain atmospheric

conditions. This will usually clear as atmospheric condi-

tions change to allow the condensation to change back into

a vapor. Turning the lamps on will usually accelerate the

clearing process.

Halogen Headlamps

1. Open hood and support using prop rod.

2. Remove the front grille. Turn the retainers along the top

1/4 turn counterclockwise and remove.

LED – (Serviced At Authorized Dealer)

LED – (Serviced At Authorized Dealer)

3. Pull the bottom of the grille away starting at one side

and working toward the other.

4. Remove the three screws holding the headlamp to the

5. Remove lamp from the vehicle.

6. Remove the lamp from the collar.

7. Grasp the bulb and turn 1/4 turn counterclockwise.

8. Pull the bulb from the housing.

9. Push connector locking tab to the unlock position.

IN CASE OF EMERGENCY 381

Table of Contents