Preparations For Jump Start - Jeep Wrangler2018 Owner's Manual

Hide thumbs Also See for Wrangler2018:
Table of Contents

Advertisement

404 IN CASE OF EMERGENCY

Preparations For Jump Start

The battery in your vehicle is located in the right rear of the
engine compartment, behind the Power Distribution Cen-
ter.
Positive Battery Post
NOTE: The positive battery post is covered with a protec-
tive cap. Lift up on the cap to gain access to the post.
WARNING!
• Take care to avoid the radiator cooling fan whenever
the hood is raised. It can start anytime the ignition
switch is ON. You can be injured by moving fan
blades.
• Remove any metal jewelry such as rings, watch
bands and bracelets that could make an inadvertent
electrical contact. You could be seriously injured.
• Batteries contain sulfuric acid that can burn your
skin or eyes and generate hydrogen gas which is
flammable and explosive. Keep open flames or
sparks away from the battery.
1. Apply the parking brake, shift the automatic transmis-
sion into PARK (manual transmission in NEUTRAL)
and turn the ignition to LOCK.
2. Turn off the heater, radio, and all unnecessary electrical
accessories.
3. If using another vehicle to jump start the battery, park
the vehicle within the jumper cable's reach, apply the
parking brake and make sure the ignition is OFF.

Advertisement

Table of Contents
loading

Table of Contents