To Manually Turn Off The Start/Stop System; To Manually Turn On The Stop/Start System; System Malfunction - Jeep Wrangler2018 Owner's Manual

Hide thumbs Also See for Wrangler2018:

Table of Contents

332 STARTING AND OPERATING

To Manually Turn Off The Start/Stop System

1. Push the STOP/START Off switch (located on the

switch bank). The light on the switch will illuminate.

STOP/START Off Switch

2. The STOP/START OFF message will appear in the

instrument cluster. Refer to "Instrument Cluster Dis-

play" in "Getting To Know Your Instrument Panel" for

further information.

3. At the next vehicle stop (after turning off the STOP/

START system), the engine will not be stopped.

4. If the STOP/START system is manually turned off, the

engine can only be started and stopped by cycling the

ignition switch

5. The STOP/START system will reset itself back to an ON

condition every time the key is turned off and back on.

Push the STOP/START OFF switch (located on the switch

bank). The light on the switch will turn off.

If there is a malfunction in the STOP/START system, the

system will not shut down the engine. A "SERVICE STOP/

START SYSTEM" message will appear in the instrument

cluster display. Refer to "Instrument Cluster Display" in

"Getting to Know Your Instrument Panel" for further

information.

If the "SERVICE STOP/START SYSTEM" message appears

in the instrument cluster display, have the system checked

by an authorized dealer.

Table of Contents