Jeep Wrangler2018 Owner's Manual page 282

280 SAFETY
Frequently Asked Questions About Installing Child Restraints With Seat Belts
What is the weight limit (child's
weight + weight of the child re-
straint) for using the Tether Anchor
with the seat belt to attach a forward
facing child restraint?
Can the rear-facing child restraint
touch the back of the front passenger
seat?
Can the head restraints be removed?
Can the buckle stalk be twisted to
tighten the seat belt against the belt
path of the child restraint?
NOTE: If the folding, non-adjustable head restraint inter-
feres with the installation of the child restraint, the head
restraint may be folded and the child seat installed in front
of it.
Weight limit of the Child Restraint
Yes
Two Door Models- No
Four Door Models - Yes
No
Always use the tether anchor when
using the seat belt to install a for-
ward facing child restraint, up to the
recommended weight limit of the
child restraint.
Contact between the front passenger
seat and the child restraint is al-
lowed, if the child restraint manufac-
turer also allows contact.
Two Door — None
Four Door — Center Only
Do not twist the buckle stalk in a seat-
ing position with an ALR retractor.