Jeep Wrangler2018 Owner's Manual page 38

36 GETTING TO KNOW YOUR VEHICLE
DO NOT Grab The Door Handle When Locking
The vehicle doors can also be locked by using the lock
button located on the vehicle's interior door panel.
To Unlock/Enter The Swing Gate
The Swing Gate passive entry unlock feature is built into
handle of the Swing Gate. With a valid Passive Entry key
fob within 5 ft (1.5 m) of the Swing Gate, grab the Swing
Gate handle to unlock the Swing Gate automatically, and
pull the Swing Gate to open.
NOTE: If "Unlock All Doors 1st Press" is programmed all
doors & the swing gate will unlock when you grab hold of
the swing gate handle. To select between "Unlock Driver
Door 1st Press" and "Unlock All Doors 1st Press," refer to
"Uconnect Settings" in "Multimedia" for further informa-
tion.
Swing Gate Passive Entry Location
To Lock The Swing Gate
With a valid Passive Entry key fob within 5 ft (1.5 m) of the
swing gate, pushing the passive entry lock button will lock
the vehicle doors and the swing gate.