Jeep Wrangler2018 Owner's Manual page 384

382 IN CASE OF EMERGENCY
10. Remove connector from bulb.
11. Push connector onto new bulb base, and push the
connector locking tab to the lock position.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
12. Reinstall bulb housing. Rotate the bulb 1/4 turn clock-
wise.
Front Park/Turn Signal
1. Remove the front wheel liner fasteners to access bulb
sockets.
Wheel Liner
2. Turn the socket assembly 1/4 turn counterclockwise and
remove from housing. Pull the bulb straight from the
socket to replace.
LED Front Side Marker
1. Remove the front wheel liner fasteners to access side
maker screw and electrical connector.
2. Remove fastening screw in the back of the front side
maker assembly and disconnect electrical connector.
3. Remove and replace LED front side marker light assem-
bly.