Jeep Wrangler2018 Owner's Manual page 105

3. Swing the frame bracket around the side of the rail, and
insert the screws from underneath. Tighten with #40
Torx head driver until they are snug, being careful not to
cross-thread the screws or overtighten.
Step Three
CAUTION!
Do not overtighten the screws. You can strip the screws
if they are overtightened.
GETTING TO KNOW YOUR VEHICLE 103
4. Set the rear door frame pin into the hole on top of the
body side, just behind the rear door opening.
Step Four
3