Jeep Wrangler2018 Owner's Manual page 92

90 GETTING TO KNOW YOUR VEHICLE
6. Using the provided #40 Torx head driver and ratchet,
tighten the Torx screws by turning them clockwise.
Secure them until they are snug (refer to the table below
for recommended torque specifications), being careful
not to cross-thread the screws or overtighten. Repeat on
the opposite side.
Lift Assist Mechanism In Place
1 — Lock Position
2 — Torx Head Screw
3 — Torx Head Screw
Torque Maximum
Specification
For Torx Screws
119.5 In-lbs 150.5 In-lbs
13.5 N·m 17.0 N·m
CAUTION!
Do not overtighten the screws. You can strip the screws
if they are overtightened.
Minimum
106.2 In-lbs
12.0 N·m