Rear Quarter Window Removal - Jeep Wrangler2018 Owner's Manual

148 GETTING TO KNOW YOUR VEHICLE
2. Ensure the power top is in the fully closed position.
3. Push and hold the Close switch for 10 seconds. This will
put the power top into calibration mode.
4. Continue holding down the close button while the top
goes fully open and then back to fully close.
5. Once the power top has stopped in the fully closed
position, release the close button. The power top is now
reset and ready to use.
NOTE: If the close button is released anytime during the
relearning process, the relearn may not be complete, and
the procedure must be repeated.

Rear Quarter Window Removal

On vehicles equipped with a Power Sliding Top, the rear
quarter windows can be removed. To remove these win-
dows, follow the procedure below:
1. Open the swing gate, and lift the rear window.
2. Open both side doors nearest the quarter windows.
3. Locate the rear quarter window latches (one on each
window) on the interior of the windows.
4. Rotate the left hand side latch clockwise to release.
5. Rotate the right hand side latch counterclockwise to
release.
Rear Quarter Window Release Latches
1 — Rotate Left Handle Clockwise
2 — Rotate Right Handle Counterclockwise