Green Indicator Lights - Jeep Wrangler2018 Owner's Manual

198 GETTING TO KNOW YOUR INSTRUMENT PANEL
instrument cluster display, for further information refer to
"Instrument Cluster Display Menu Items" in "Getting To
Know Your Instrument Panel."
The number "55" is only an example of a speed that can be
set.
— Cruise Control Ready Indicator Light —
If Equipped With A Premium Instrument Cluster
This light will turn on when the speed control has been
turned on, but not set. Refer to "Speed Control — If
Equipped" in "Starting And Operating" for further infor-
mation.

Green Indicator Lights

— 4WD Auto Indicator Light — If Equipped
This light alerts the driver that the vehicle is in the
four-wheel drive auto mode. The system will provide
power to all four wheels and shift the power between the
front and rear axles as needed. This will provide maximum
traction in dry and slippery conditions.
— Active Speed Limiter SET Indicator Light —
If Equipped With A 7.0 Instrument Cluster Display
This light will turn on when the Active Speed Limiter is on
and set to a specific speed.
— Cruise Control Set Indicator Light —
If Equipped
This light will turn on when the speed control is set to the
desired speed. Refer to "Speed Control" in "Starting And
Operating" for further information.
— Front Fog Indicator Light — If Equipped
This indicator will illuminate when the front fog lights are
on.
— Park/Headlight On Indicator Light
This indicator will illuminate when the park lights or
headlights are turned on.
— Stop/Start Active Indicator Light —
If Equipped
This telltale will illuminate when the Stop/Start function is
in "Autostop" mode.
— Turn Signal Indicator Lights
When the left or right turn signal is activated, the turn
signal indicator will flash independently and the corre-
sponding exterior turn signal lamps will flash. Turn signals
can be activated when the multifunction lever is moved
down (left) or up (right).