Jeep Wrangler2018 Owner's Manual page 71

NOTE: The mist feature does not activate the washer
pump; therefore, no washer fluid will be sprayed on the
windshield. The wash function must be used in order to
spray the windshield with washer fluid.
Mist Control
Rear Window Wiper/Washer — If Equipped
A rotary switch on the center portion of the windshield
wiper/washer lever controls the operation of the rear
wiper/washer function.
GETTING TO KNOW YOUR VEHICLE 69
Rear Wiper/Washer Control
Rotate the switch upward to the first detent position
for intermittent operation and to the second detent
for continuous rear wiper operation.
Push the wiper lever toward the instrument
panel to activate the rear washer. The washer
pump and wiper will continue to operate as long
as the lever is held.
If the rear wiper is operating when the ignition is turned to
the LOCK position, the wiper will automatically return to the
"park" position. When the vehicle is restarted, the wiper will
resume function at whichever position the switch is set at.
3