Jump Starting - Jeep Wrangler2018 Owner's Manual

To Reset The Manual Park Release:
1. Pull upward on the tether strap, releasing it from the
"locked" position.
2. Lower the Manual Park Release lever downward and to
the right, into its original position.
3. Pull up gently on the tether strap to confirm that the
lever is locked in its stowed position.
4. Tuck the tether strap into the base of the console, and
reinstall the cover.

JUMP STARTING

If your vehicle has a discharged battery, it can be jump
started using a set of jumper cables and a battery in another
vehicle, or by using a portable battery booster pack. Jump
starting can be dangerous if done improperly, so please
follow the procedures in this section carefully.
WARNING!
Do not attempt jump starting if the battery is frozen. It
could rupture or explode and cause personal injury.
CAUTION!
Do not use a portable battery booster pack or any other
booster source with a system voltage greater than 12
Volts or damage to the battery, starter motor, alternator
or electrical system may occur.
NOTE: When using a portable battery booster pack, follow
the manufacturer's operating instructions and precautions.
IN CASE OF EMERGENCY 403
7