Jeep Wrangler2018 Owner's Manual page 78

76 GETTING TO KNOW YOUR VEHICLE
Automatic Control Descriptions
Icon
MAX A/C Button
Press to change to the coldest setting, the indicator illuminates when MAX A/C is on. Pressing
the button again causes the MAX A/C operation to switch into manual mode and the MAX
A/C indicator turns off.
A/C Button
Press and release to change the current setting. The indicator illuminates when A/C is on.
Recirculation Button
Press and release this button on the touchscreen, or push the button on the faceplate, to change
the system between recirculation mode and outside air mode. Recirculation can be used when
outside conditions, such as smoke, odors, dust, or high humidity are present. Recirculation can
be used in all modes. The A/C can be deselected manually without disturbing the mode control
selection. Continuous use of the Recirculation mode may make the inside air stuffy and window
fogging may occur. Extended use of this mode is not recommended. The A/C can be deselected
manually without disturbing the mode control selection.
AUTO Button
Automatically controls the interior cabin temperature by adjusting airflow distribution and
amount. Toggling this function will cause the system to switch between manual mode and auto-
matic modes. Refer to "Automatic Operation" for more information.
Description