Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped - Jeep Wrangler2018 Owner's Manual

Gear Display — If Equipped
• Full (default setting)
• Single
Current Gear
• On
• Off (default setting)
Odometer — If Equipped
• Show (default setting)
• Hide
Favorite Menus
• Speedometer
• Vehicle Info
• Off Road – If Equipped (show/hide)
• Fuel Economy (show/hide)
• Trip Info (Show/Hide)
• Stop/Start
• Audio (show/hide)
• Messages
• Screen Setup
GETTING TO KNOW YOUR INSTRUMENT PANEL 185
Defaults (Restores All Settings To Default Settings)
• Cancel
• Restore
The menu with (show/hide) means user can press OK
button to choose show or hide this menu on the instrument
cluster display.
Battery Saver On/Battery Saver Mode Message —
Electrical Load Reduction Actions — If Equipped
This vehicle is equipped with an Intelligent Battery Sensor
(IBS) to perform additional monitoring of the electrical
system and status of the vehicle battery.
In cases when the IBS detects charging system failure, or
the vehicle battery conditions are deteriorating, electrical
load reduction actions will take place to extend the driving
time and distance of the vehicle. This is done by reducing
power to or turning off non-essential electrical loads.
Load reduction is only active when the engine is running.
It will display a message if there is a risk of battery
depletion to the point where the vehicle may stall due to
lack of electrical supply, or will not restart after the current
drive cycle.
4